Jump to content

GEARMASTER CLP 460

Mineral oil based high-performance gear oils

Performance Features

  • highest load carrying capacity
  • excellent wear protection
  • good stability against ageing
  • high thermal stability
  • minimum formation of foam
  • excellent corrosion protection

Description

GEARMASTER CLP-Oils are modern high-performance gear oils based on especially selected base oils showing excellent thermal stability, good ageing stability as well as extraordinary wear protecting properties.

Field of application

GEARMASTER CLP-Oils are used in industrial gear boxes subject to high loads, e.g. spur gears, bevel gears and planetary gears.

Method of application

GEARMASTER CLP-Oils reduce friction significantly. Therefore, the temperature level of the gears can be lowered and the operating time of the oil can be extended. Maintenance intervals can be prolonged, too.

Note

GEARMASTER CLP oils exceed the requirements according to DIN 51 517-3. Approved by Siemens AG/Flender Getriebe, Bocholt (chart T7300) for viscosities 150 - 680.

Industries

  • Cement
  • Construction
  • Machinery, equipment
  • Mining, quarrying, exploration
  • Other industries
  • Power generation
Note

The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.

Service Contact
+49 621-3701-0