BITEEREX AQUA
Asphalt and bitumen release agent for hot and melted asphalt
Performance Features
- economical to use
- good release effect when transporting asphalt on truck loading platforms
- suitable for commercially available rubber materials
- ready-to-use
- easily biodegradable
- not subject to labelling
Description
BITEEREX AQUA is a low-viscosity, emulsion-based, ready-to-use release agent for asphalt and bitumen.
Thanks to its good release effect the product is suitable both for melted as well as for hot asphalt.
Field of application
Asphalt mixing plants, asphalt recycling plants, road finishing machines, rubber-tire rollers, and other equipment.
Application
BITEEREX AQUA is applied thinly and uniformly with a brush or suitable spraying device (with Unijet nozzle SS 800067). Also suitable for spraying equipment. Oil should be removed from conveying belts of rubber elastomers prior to the application of BITEEREX AQUA. Consumption ranges between 40 and 60 m²/l. BITEEREX AQUA must not be diluted with water, oils or solvents – it is ready for use!
Release agent tanks must be emptied completely and, if necessary, flushed with BITEEREX AQUA to prevent clogging of the nozzles.
Note
- The storage period should not exceed 6 months
- Store barrels horizontally
- Re-seal container after use
- Preliminary trials required
- Before use, check whether the criteria in the operating instructions for the system/device are met
If tires have been treated with diesel or fuel oil, a changeover to BITEEREX AQUA is no longer possible.
Please observe water resources policy act and EU safety data sheet!
The product may not contact zinc or galvanised materials.
Industries
- Construction
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.
