GLEITMO 2345V
Dry Solid Film Lubricant
Performance Features
- user-friendly and environmentally harmless
- sticks well on all materials
- forms a dry, thin lubricating film
- provides clean assembly conditions
- allows high deformations
Description
GLEITMO 2345V is a suspension of high molecular polymers in water. The dry lubricating film remaining after the application sticks well on the different surface types, is forming an absolutely tack-free film and has no influence on the other properties of the coated material.
Field of application
GLEITMO 2345V has been developed for cold metal forming and for the lubrication of rubber parts.
Method of application
GLEITMO 2345V can be applied via compressed air and airless spraying systems. Agitators are recommended for the container in this case. Round-jet spraying guns with a 0.8 mm nozzle and a spraying pressure of 2.5 to 3.5 bar are suitable. Spraying distance: 15 - 20 cm. Immersion is convenient for small parts. Painting using brushes or rollers is recommended only when spraying or immersion is not possible. The sliding surfaces to be coated should be carefully degreased with a solvent and allowed to dry. Avoid burrs and sharp edges on sliding pairings. Normally coating of one sliding surface is sufficient.
The use of warm air can reduce the drying-time considerably.
Note
Protect from freezin! Stir well before use. Shelf life: 12 month in closed original containers at room temperature
Industries
- Automotive
- Machinery, equipment
- Steel, metals
Specifications
Approvals
FUCHS Recommendations
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.
