Jump to content


Water-based MoS2 Solid Film Lubricant

Performance Features

  • temperature range: -180 / +250 °C
  • resistant to mineral oil and synthetic fluids
  • forms a dry, firmly adhering lubricating film
  • resistant to high loads
  • produces a low, constant friction
  • prevents from seizure of materials with a tendency towards cold welding
  • facilitates assembly
  • prevents from stick-slip friction


GLEITMO SFL 9025 is a water-based Solid Film Lubricant. Its active lubricating component is a synergistically acting combination of solid lubricants with a predominant portion of molybdenum disulphide.

Field of application

For the coating of screws or nuts in order to avoid fretting (stainless steel) in order to achieve defined assembly and disassembly. GLEITMO SFL 9025 is suitable for dry lubrication of slide rails, joints and bolts and for running-in lubrication of highly loaded parts.

Method of application

GLEITMO SFL 9025 is applied via compressed air and airless spraying systems. Dipping or centrifuging is convenient for small parts. Brush or roller is recommended only in case spraying or immersion is infeasible. The sliding surfaces to be coated should be carefully degreased with a solvent or water-based cleaners and should be dry before applying. Phosphating or sandblasting pre-treatment is recommended to increase the adhesion of the coating on metal parts.


Stir well before use! Protect from freezing.
Shelf life: 18 months in closed original containers at room temperature


  • Automotive
  • Machinery, equipment
  • Steel, metals





FUCHS Recommendations


The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.

Service Contact
+49 621-3701-0