GLEITMO SFL 9563
Heat-curing Solid Film Lubricant with PTFE and molybdenum disulphide
Performance Features
- Temperature range for use: -70/+180 °C, short term up to 250 °C
- forms a dry, firmly adhering lubricant film
- provides good corrosion protection
- highly resistant to solvents, mineral oils and synthetic fluids
- very resistant to wear and abrasion
- makes lifetime lubrication possible
- has excellent lubrication properties
- resists high pressures
- provides a decorative surface finish
Description
GLEITMO SFL 9563 is a heat-curing solid film lubricant having PTFE and molybdenum disulphide as constituents for lubrication efficiency. The product forms a dry lubricating film, which is distinguished by its excellent lubricating effect, high degree of abrasion resistance and good corrosion protection. Because of its advanced bonding system GLEITMO SFL 9563 can already be cured at 130 °C, thus protecting the substrate and enabling energy to be saved. GLEITMO SFL 9563 is resistant to mineral oils and many chemicals.
Field of application
GLEITMO SFL 9563 is used for the lifetime lubrication of metallic materials subjected to medium and high pressures and slow sliding speeds as well as for running-in lubrication on heavily loaded component parts. Examples are the lubrication of adjusting mechanisms (levers, spindles and slide rails) or machine components requiring dry lubrication and good corrosion protection.
Method of application
Coating is carried out by spraying or using the dipping or centrifugal dipping methods. Before this happens, the parts to be coated must be thoroughly degreased with a solvent. The surfaces must be dry when the coating is applied. To increase the adhesive strength, and therefore the lifetime, pre-treatment of the surfaces is recommended by phosphatising or sand-blasting. In order to achieve quicker drying and improved adhesion of the coating, pre-heating of the parts to about 80-90 °C before coating has proved to be effective.
Note
Stir well before use! Shelf-life: 12 months in closed original containers at room temperature.
Industries
- Automotive
- Machinery, equipment
- Steel, metals
Specifications
Approvals
FUCHS Recommendations
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.
