GLEITMO SFL 9085
Water-based PTFE Solid Film Lubricant
Performance Features
- temperature range: -180 / +250 °C
- forms a dry, thin lubricating film
- adheres very well on many material surfaces
- offers exceptional non-stick and separating characteristics
- does not soil nor grease
- facilitates assembly of parts with robots (sealing rings, screws)
- suitable for use in food industry
- is environmentally harmless and user friendly
- is containing an UV-illumination additive for coating control by means of UV-light (340 – 380 nm)
Description
GLEITMO SFL 9085 is an air-drying water-based solid film lubricant with an organic binder. It contains a specially processed polytetrafluorethylene as an active ingredient with high lubrication and separating effects. GLEITMO SFL 9085 adheres very well on many materials.
Field of application
For dry lubrication of a wide variety of material pairings, such as metals, plastics, rubber and ceramics either with or among each other. For lubrication, wear protection and to avoid noise occurance in automobile interieur. GLEITMO SFL 9085 can be used for the coating of screws, nuts, bolts, fittings and rubber seals to enable defined assembly.
Method of application
GLEITMO SFL 9085 may be applied with compressed air and airless spraying systems. Agitators are recommended for the container in this case. Immersion is economical for coating large quantities of small parts. Application by brush or roller may lead to uneven coatings if not performed thoroughly and is only recommendable if spraying or immersion is not possible. The sliding surfaces to be coated should be carefully degreased with a solvent and allowed to dry.
Note
Stir well before use! Protect from freezing! Shelf-life: 18 months in the closed original containers at room temperature
Industries
- Automotive
- Machinery, equipment
- Steel, metals
- Other industries
Specifications
Approvals
FUCHS Recommendations
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.
