GLEITMO SFL 9070
Water-based PTFE Solid Film Lubricant
Performance Features
- temperature range: -70 / +180 °C
- forms a dry, thin lubricating film
- very good adhesion on a large number of material surfaces
- Excellent „anti-squeak“ properties
- offers good non-stick and separating properties
- neither dirty nor oily
- environmentally and user-friendly
- contains UV additive for UV coating inspection
Description
GLEITMO SFL 9070 is a water-based and air-drying solid film lubricant with an organic binder. The lubricating effect is achieved by a combination of special fluoropolymers featuring high lubrication and non-stick properties along with an excellent “anti-squeaking” effect.
Field of application
For dry coating of various material combinations especially of plastics, rubbers, and leather. Allows smooth running, protects against wear, and prevents squeaking noise caused by stick slip of plastic combinations in a car’s interior. GLEITMO SFL 9070 is also suitable for the lubrication of screws/bolts, nuts, pins, sleeves and elastomer seals to obtain defined assembly results.
Method of application
GLEITMO SFL 9070 can be processed using compressed air or airless spraying systems. In case of partial coatings GLEITMO SFL 9070 can be applied using an absorbent material (e.g. sponge) or a brush. Immersion or immersion centrifugation is appropriate for larger quantities of small parts. Sliding surfaces to be coated must be carefully degreased and dried prior to the application.
Note
Stir before use!
Protect from frost!
Shelf life: 12 months in closed original containers at ambient temperature.
Industries
- Automotive
- Machinery, equipment
Specifications
Approvals
FUCHS Recommendations
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.
