RENOLIT MT 2
Lithium-free EP multipurpose grease based on a mixed thickener and mineral oil. Contains additives to improve corrosion and wear protection and load carrying capacity.
|Classification DIN 51502||KP2K-30|
|Classification ISO 6743-9||-|
|Thickener||Calcium Base |
|Base oil||Mineral oil|
|Base oil viscosity at 40 °C||100 mm²/s|
|Temperature range||-30/+130 °C|
Main application area
RENOLIT MT 2 is ideally suited for the lubrication of plain and roller bearings in construction machinery subjected to severe operating conditions, for all lubrication points. Furthermore suitable for vibration, dry and wet screening, reprocessing units, construction, stone, earth industries, gravel quarries, stone quarries, and mobile recycling equipments.
- Mining, quarrying, exploration
- Agriculture, forestry
- Other industries
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.